

1. Durable and long life. Photovoltaic glass has a longer lifespan than photovoltaic backplanes. Ordinary photovoltaic solar panels need to add a thin film on the outermost layer of the backsheet to ensure the efficiency and life of the components. Double-sided double-glass photovoltaic solar panels are not used. At the same time, the glass has better barrier performance and good moisture resistance, which further ensures the power generation efficiency and improves the life of the solar panel.
2. Low attenuation. The backsheet material of ordinary single-sided photovoltaic solar panels is an organic material. Water vapor can penetrate the backsheet and cause rapid degradation of EVA resin. The decomposition products contain acetic acid, which will corrode the silver grid lines and busbars on the photovoltaic cells. The power generation efficiency of photovoltaic panels decreases year by year. The zero water permeability of the glass reduces the power loss of the photovoltaic panel, improves the power generation efficiency, reduces the attenuation rate by 0.2%, and prolongs the service life by about 5 to 30 years.
3. Good mechanical performance, stable and reliable power generation. The wear resistance, insulation, water resistance and bearing capacity of the glass are better than those of the back sheet, which reduces problems such as local cracks in photovoltaic cells and makes power generation more stable and reliable. Secondly, the fire performance of double-glass solar panels has been significantly improved, and the fire protection level has been raised from the traditional C level to A level.
4. Large heat capacity, reducing hot spot effect. The double-glass solar panel itself has a larger heat capacity, a smaller temperature rise rate, and is less susceptible to cold and heat shocks. Moreover, the thermal diffusivity difference between the glass and the backplane is more than 7 times, and the heat dissipation is much faster by using double glass, which can effectively reduce hot spot damage.
5. No aluminum frame design, effectively solve the PID attenuation, and the weight is lighter. The double-sided double-glass photovoltaic solar panel has a frameless design. Without an aluminum frame, the electric field that causes PID cannot be established, which greatly reduces the possibility of PID attenuation. At the same time, because there is no aluminum frame, the weight of the solar panel is greatly reduced, which is easier to install and reduces the load bearing.
Product link: https://www.bigluxled.com/solar-light-tower/1305w-mobile-solar-light-tower.html
https://www.bigluxled.com/mobile-solar-power/customizable-solar-cctv-trailer.html
Thank you for browsing!
Phone And WhatsApp Number: +86 176 8376 4391
Email: simon@bigluxsolar.com
Address: #701 JinHongFeng Building, 71Zone, Xingdong, Xin'An Street, BaoAn, ShenZhen, China

