Reflective design
1. According to the use of the lighting system, one of them is concentrated light close-range and large-area lighting. Based on this we need to design the concentrating reflectors, lamps and lanterns in the dispersion Angle of 180 ℃.
2: in order to make the lighting more efficient, we chose the highlight in reflectors materials reflective material, can use directly after coining of 300 ℃ high temperature resistant deformation, discoloration glance with good performance.
Glass is chosen
Special toughened glass is adopted. Its transmittance is twice that of ordinary glass.
Lifting function
As a lifting and adjusting method, telescopic air rod is designed with a large lifting height of 2.2 meters in the lighting system, and its section shape is specially designed. High strength oxidation treatment on the surface of the air rod, wear resistance and corrosion resistance, long service life, light weight, easy to carry.
Lighting system
Four lamp heads are installed on the lamp disc, and the lamp tube is four 500W golden halogen lamps, which have good light aggregation effect. The single-tube optical flux is 10000lm and the service life is over 10,000 hours. According to the site will need to do the up and down or so separately for each lamp holder Angle adjustment, rotate 360 ° full arbitrary direction lighting; The lamp holder can turn vertically and horizontally.
The light source is chosen
Considering that lighting of the lamp can work better, the light source requires high light efficiency and long life. We mainly use golden halogen bulbs. 2: the gas discharge bulb has no filament, and the new technology has high shock resistance.