Shenzhen, China – BIGLUX completed field validation of the wireless remote system built for its solar light tower. Tests ran on open outdoor ground, not inside a laboratory, to gather real performance data for contractors and teams sourcing reliable construction site lighting.
Technicians tested every remote function on individual tower units at the site. They also checked group control performance for this mobile solar light tower. All operations were logged to record actual device response, showing how this setup cuts repetitive manual work when arranging site lighting.
Compact Remote Supports Full Control at the Site
The trial used the standard handheld remote supplied with BIGLUX solar light towers. Eight physical buttons have fixed, clear labels, so field crews can learn operation quickly without long training.
- Button 1: Turn lights ON
- Button 2: Turn lights OFF
- Buttons 7 and 8: Raise and lower the telescopic mast
- Buttons 3 and 4: 90-degree vertical tilt adjustment for lamp heads
- Buttons 5 and 6: 350-degree horizontal rotation for lamp heads
Operators can adjust light coverage to focus on required work zones, with no need to move the whole tower. The remote keeps steady signal up to 200 metres on unobstructed open land. One test sequence involved controlling the unit from inside a vehicle. This approach reduces constant walking over rough ground typical for construction worksites.
Group Control Activates Multiple Towers Simultaneously
Light tower group control comes as a native function of this control system. Once each tower finishes pairing with the assigned remote, one command applies to all connected units.
- One paired remote sends synchronous commands to all compatible BIGLUX solar light towers
- Five tower units were selected to test group response during this field trial
- A single command lifts all masts and switches on lights for every linked device
This function works well for large construction plots, storage yards and temporary work zones running multiple lighting towers. Site staff do not need to visit each tower one by one to power on or adjust lighting angles.
Multiple Operating Modes for Different Site Conditions
Wireless remote operation is just one control method available for this solar light tower. Three built-in working modes are offered to match different site requirements:
- Timer mode: Pre-programmed automatic on and off cycles
- Auto-sensing mode: Light activation triggered by surrounding ambient brightness
- Local manual mode: Direct control via the physical panel mounted on the tower body
Site managers select suitable modes according to work shifts, access rules and safety requirements on site. BIGLUX provides complete mobile solar lighting solutions instead of separate spare parts, matching control functions to real operational demands for construction and remote site projects.
Demo Summary
This field check proves stable performance for single-tower remote operation and multi-unit group synchronisation. The wireless system lowers regular manual workload for field crews and simplifies lighting management across large work areas. Buyers looking for remote controlled light tower will find this remote function delivers practical efficiency for night site work.
Contact BIGLUX for Your Solar Lighting Requirements
Construction rental, mining and remote infrastructure projects all have unique site limits. If you need specification documents or layout advice for solar light towers, send your enquiry via our official web form. Our sales and technical team will share product details tailored for your project.