Knowledge

Ten questions about the basic knowledge of lithium batteries (7)

Dec 07, 2018 Leave a message

b3d2ef09b6d78ebd184867e73928306d3bbd0ad0b1ca-8I86Dk

1. Battery core resistance requirements?

Heavy rain 20MQ


2. What should I do if the resistance of the battery core does not meet the requirements?

Rework


3. Why do you have to stick adhesive paper?

Increases robustness and prevents short circuits from contact with the ears.


4. What tests do I need to perform before using the battery cover?

Inspection of dimensions, shape, thickness, insulation cup, sealing, corrosion resistance, materials, etc.


5. What is the maximum pressure that the battery cover can withstand?

0.4Mpa


6. How to prevent battery leakage?

To prevent battery leakage, you should do the following work:

1. When welding the battery casing and the cap, it should be welded firmly and sealed, no welding, no welding, no welds, no cracks, cracks, etc.

2. When the steel ball is sealed, the steel ball is of the same size, and the steel ball material is the same as the cap material. The weld has no cracks, cracks and is firmly welded.

3. The positive electrode of the cap is riveted tightly, without gaps, and the insulating gasket is elastic, corrosion-resistant and aging-free.


7. How to prevent the water in the workshop of the non-interface battery under the existing conditions?

1. The operating battery should be small several times. Reduce the exposure time of the battery in the air.

2. The completed battery is transferred to the next process in time. Try to shorten the battery's stagnation time in production.


8. Humidity requirements of the drying room?

The relative humidity is below 6%.


9. What is the effect of the humidity in the drying room on the performance of the battery?

The increase in humidity causes the water absorption of the battery core to increase, the capacity of the battery decreases, and the internal pressure increases.


10. How to prevent moisture from entering the drying room?

Less in and out, less door opening, the door of the drying room can not be opened at the same time.


Send Inquiry