As the development of grille light, according to the demand of customer and the stylist, it can be divided into two styles of invisible and obvious installations. It is divided into I type and V type according to the style of the reflector cover. Different reflector cover is greatly different in aesthetics and reflection effect. Generally, the v-shaped cover will be better than the i-type in aesthetics and reflection effect, and the price is not much different. It's also very easy to distinguish between I and V, which is generally intuitive.
Classification
LED grille light
A lighting fixture, suitable for mounting in an office with a ceiling. The light source before is daylight light tube commonly. The new LED grille light is made of aluminum substrate laminated with LED laminated beads. Suitable for long time, high power indoor lighting. Is a new type of office energy-saving light beads. Installation methods are divided into embedded and suction type.
Mirror aluminum grating light
The grille aluminum sheet adopts mirror aluminum and deep arc type design, with better reflection effect. The chassis adopts high quality cold rolled steel sheet. The thickness of the steel plate is generally 0.4mm-0.6mm. All plastic parts are flame retardant.
Organic panel grille light
Adopting imported organic board materials, good light transmittance, uniform and soft light, good fire performance, in line with environmental protection requirements. The chassis is made of high quality cold rolled steel plate, and the surface is treated by phosphating spraying process. All plastic parts are flame retardant.
Optical feature editing
As the energy gap of the semiconductor decreases with the rise of temperature, the peak wavelength emitted by the LED increases with the rise of temperature, namely the spectrum redshift, and the temperature coefficient is +2~3A/. LED luminescence L is approximately proportional to the forward current. As the current increases, so does the luminescence.
Life editor
The life of LED grille light mainly depends on the solid LED light source and drive dispersion
The thermal part is now LED light source life
With the continuous development and application of LED technology, it has reached a relatively ideal state in terms of drive and heat dissipation. The commercial quality LED light has a lifespan of 10,000-50,000 hours, which is nearly 10-50 times that of the ordinary halogen light.
LED lighting products save power up to 80% or more, almost free of maintenance. There is no problem of frequent replacement of components. The cost saved in about half a year can be replaced back. Green and environment-friendly semiconductor electric light source with soft light and pure spectrum is beneficial to workers' vision protection and health.
light advantages editor
1. Energy saving: the power consumption of LED lights with the same power is only 10% of that of incandescent lights, which is more energy saving than fluorescent lights.
Long life: LED beads can work for 50,000 hours, longer than fluorescent or incandescent bulbs.
3. Adjustable light: previously, the dimmer was always aimed at incandescent lights, which turned red when dimming; It's hard to see daylight modulation
Optical device, which is the main reason why the dimming technology has not developed for many years; LED technology developed to be able to adjust light products, and whether bright or
Dark light is the same color (the color temperature is basically the same), which is significantly better than incandescent dimming.
4. Frequent switches: the life of LED is calculated according to the lighting time, even if there are thousands of switches per second
This does not affect LED life
Lighting, such as need to frequently on and off occasions, LED lights have absolute advantage.
5. Rich colors: there are various colors such as positive white light, warm white light, red, green and blue, which are used for decoration beside the headlights in the living room
The little lights or the neon lights are very bright.
6. Low heat output: like the spotlights, many 220V spotlights fail within a few days because of the heat. 12V halogen light heating
Although the quantity is lower than that of the 220V spotlights, the brightness cannot reach the nominal value due to the insufficient power of the transformer. With LED shoot
Lights, you can work long hours without a transformer.
Matters needing attention
Installation matters
1. In order to ensure the safe installation, maintenance and inspection of lights, please entrust electrical appliances professionals to take charge. Non-professional construction is prone to danger;
2. Do not install the light in the place shown. This luminaire is specially designed for ceiling installation;
3. Do not use in parallel with the dimmer to avoid failure. Do not install above high temperature objects and in damp places
4. Do not use light source larger than the specified maximum power. Please refer to the power sticker on the product.
5. Make sure there are 75mm ventilation holes around the product, and the light shall not violate any fire safety regulations. Please cut off the power before maintaining, installing and replacing the light source. Verify that the light source is installed correctly.
Installation instructions
1. Remove the grille reflective cover on the light panel, and take it lightly when taking the grille reflective cover. Do not scratch it. When placing, please pay attention to the position of the four sides, and let the four sides of the light use the keel bar completely to avoid the drop of the light.
2. Put the power cord into the outlet hole and connect it to the terminal station correctly. Please pay attention to connect fire line at L mark, zero line at N mark and ground line at ground mark.
3. Put in the light source correctly. When installing the light source, please note that the light source is stuck in the light holder groove.
4. Tie one end of the sling of the grating reflective cover into the sling hole of the light body to facilitate the subsequent replacement of the light source. Note that the shrapnel must be in good contact with the grating reflective cover to prevent the grating reflective cover from falling off.
5. Turn on the switch light, and the installation is completed.

