Solar Light Trailer 360 Mast Rotation Mobile LED Lighting Tower Trailer Depolyed In World Cup 2022 Stadium Parking Lot
Mobile solar lights trailer with LED lights specification：
Base System
Brand:BIGLUX
Name:Solar Light Trailer
Material:Steel Q235
Powder:Outdoor Type
Dimension:Length×Width×Height
〓 Transport:2300×2200×2200 (mm)
〓 Operate:3200×4400×9250 (mm)
Weight:2000kg / 4410lb
System Voltage:DC48V
Work Temperature:-35℃~50℃ / -31℉~122℉
Solar System
Solar Panel:4 × 460W ▲Monocrystalline Silicon
Battery System
GEL:8 × 200Ah,▲Free-main▲Deep-cycle
Voltage:DC12V,
Series & Parallel:2 in series, then parallel
Power Capacity:19200W·h
Light System
LED:6 × 100W ▲LED outdoor flood light ▲Outdoor Type
Protection Class:IP65
Control System
Solar Controller: EPEVER MPPT
Efficiency:95%
Detection & Protection:Short-Circuit▲ Overload▲High Voltage▲High Temperature
Mast System
Body:Steel Q235 Hot Dip Galvanized
Height：9m / 30ft
Section:9
Rotation:Horizontal 360° Electric
Recommended Loading:5kg ~ 100kg / 11lb ~ 220lb
Windproof:117km/h / 73mph
Trailer System
Standard:US / AU / EU
Outrigger:4 × Manual Galvanized
Forklift Hole:2
Warranty:2 years
Mobile solar lights trailer with LED lights photo for reference
Knowledge News
To understand how an IOT solar controller works, we need to first understand what a solar controller is.
Usually solar controller is divided into two kinds, one is PWM, one is MPPT.
What is PWM solar controller?
PWM solar controller is also known as single-chip solar controller, PWM is the use of microprocessor digital output of analog circuit control. Strong charge, balanced charge, floating charge three stage charging mode; PWM solar controller to solve the battery charge dissatisfaction, battery life is short, but the solar panel is not fully used. Single chip microcomputer can make charging work simple and high efficiency. The parallel circuit is not selected, because the service life of the PV board will be affected if the PV board is short-circuited to the output end when fully charged. Therefore, the selection of series is appropriate. Single-chip PWM system has photovoltaic maximum power point tracking ability, photovoltaic cell utilization rate is higher, PWM let the battery tends to be full, pulse frequency and time shortened, the charging process of the average charging current changes more in line with the battery's state of charge, truly from 0 to 100% charging work.
The solar PV panel can charge the battery in three stages: direct charge, floating charge and trickle charge. When designing the circuit, it is necessary to make the temperature correction compensation for the charging and discharging voltage set point of the battery, that is, the voltage set point of each charging and discharging stage will be automatically adjusted with the temperature change. The temperature compensation should meet the technical conditions of the battery, and 4mV/℃ is used as the reference value for a single section.
What is MPPT solar controller?
MPPT solar controller, refers to the "Maximum Power Point Tracking" (Maximum Power Point Tracking) function of the solar controller, MPPT solar controller can detect the voltage and current of the solar panel in real time, and constantly track the Maximum Power (P=U*I), The system is always charged with the maximum power of the battery, MPPT tracking efficiency of 99%, the whole system of high power generation efficiency of 97%, and the battery charging stage is divided into MPPT charging, constant voltage charging and constant voltage floating charging stage.
Solar controller plays an important role in the whole photovoltaic power generation system.
Ordinary solar controller is a single network mode, the photovoltaic voltage and current when the controller works, the voltage and current of the battery, the voltage and current of the load and the ambient temperature, whether the battery voltage is undervoltage, whether the photovoltaic power supply is normal, as long as the data of the LCD screen of the controller can be seen on the spot.
The solar controller of the Internet of Things enables the solar controller to automatically collect the data of the solar power supply system and upload it to the big data cloud platform. View the running status of each data in real time.
BIGLUX are very professional and full-experience in solar generator, solar light & cctv tower.
If you have any interested Mobile solar lights trailer with LED lights, please let us know so that We can send you the catalog for you reference, or visit our website directly https://www.bigluxled.com.
Looking forward to working with you.
Hot Tags: mobile solar lights trailer with led lights, China, manufacturers, supplier, factory, wholesale, low price, made in China, low carbon, construction site